HERCULES
MAXIMUM CAPACITY – MAXIMUM FLOW RATE
MAXIMUM LIFTING HEIGHT
MAXIMUM POWER
HERCULES
This range of powerful telehandlers, which are positioned in the “giants” market, include all the “pluses” related to safety, handling and comfort, in addition to highly advanced hydraulic solutions, able to use all of their strength in large construction sites, in mining sites and quarries, in harbors and shipbuilding yards, and “heavy” work in general. HERCULES can fit a wide range of accessories (winches, forks and buckets) or tools, finishes and ad hoc solutions, for specific needs.
It is equipped with pedal “INCHING” command (DIECI exclusive), which allows the vehicle to run at slow speed also with engine at full throttle.
Model
Dimension
Height from ground
530 mm
530 mm
Maximum Length
6800 mm
6800 mm
Cab Height
2930 mm
2930 mm
Tire Width
2600 mm
2600 mm
While Curve Radius
6500 mm
6500 mm
Mass
Unladen Weight
27500 kg
27500 kg
Performance
Maximum capacity – Maximum flow rate
21000 kg
21000 kg
Maximum lifting height
10,2 m
10,2 m
Maximum Height on Outriggers
Maximum Height on Wheels
10,2 m
10,2 m
Pull Out Force
18900 daN
18900 daN
Towing Force
19500 daN
19500 daN
Maximum Speed
23 km/h
23 km/h
Engine
Brand
FPT
FPT
Fueling
Diesel
Diesel
Displacement
6728 cm3
6728 cm3
Maximum Power
135 kW (181 HP)
135 kW (181 HP)
Emission Standard
Stage IIIA/Tier 3
Stage IIIA/Tier 3
Hydraulic Circuit
Hydraulic Pump Capacity
170 l/Min
170 l/Min
Maximum Operating Pressure
35 MPa
35 MPa
Transmission
Transmission Type
Hydrostatic with variable displacement pump
Hydrostatic with variable displacement pump
Tires
Standard Tires
23,5R25″”
23,5R25″”
2-SPEED HYDROSTATIC TRANSMISSION
Electronic control: maximum forward travel precision even at full speed.
1st gear at 19 km/h
Maximum speed 40 Km/h
EASY AND INTUITIVE
All boom movements are controlled by a single-lever joystick, which also incorporates the direction selector (reverse shuttle – FNR) for intuitive and comfortable control.
Dashboard with clear instrument panel and well-distributed controls.
All vehicle control functions are handled by a single control unit that measures the best working parameters through an advanced diagnostic system.
The two Load Sensing – Flow Sharing hydraulic technologies ensure more simultaneous movements and greater response to controls, for more effective work.
VERSATILE AND FLEXIBLE
The Dieci telehandlers have been designed to use the various equipment needed to carry out all the work required by a construction site: forks, loaders, lifting hooks, jibs with winches, grippers, material baskets, mixing buckets, concrete ladles, sweepers, salt spreader, snowplow blades.
Automatic equipment recognition: the vehicle configures itself automatically recognizing the equipment attached.